Develop ineo 3320 - Print Is too Light

User's Guide
- 251 -
Action
Yes
No
Step 4
Check if the paper loaded in the tray has
texture or rough finishes.
Are you printing on textured or rough
paper?
From the printer control panel,
change the texture settings in the
Paper Texture menu to match the
paper you are printing on.
Go to step 5.
Step 5
1. Load paper from a fresh package.
Note: Paper absorbs moisture due to
high humidity. Store paper in its
original wrapper until you use it.
2. Resend the print job.
Is the print still too dark?
Go to step 6. The problem is solved.
Step 6
Replace the imaging unit, and then
resend the print job.
Is the print still too dark?
Contact technical support.
The problem is solved.
Print is too light