Develop ineo 3320 - Toner Specks Appear on Prints; Transparency Print Quality Is Poor; Uneven Print Density

User's Guide
- 263 -
Toner specks appear on prints
Action Yes No
Replace the imaging unit, and then resend the print job.
Do toner specks appear on prints?
Contact technical support. The problem is solved.
Transparency print quality is poor
Action
Yes
No
Step 1
From the printer control panel, set the paper type in the Paper
menu to match the paper loaded in the tray.
Is the paper type for the tray set to Transparency?
Go to step 2.
Set the paper type to
Transparency.
Step 2
1. Check if you are using a recommended type of transparency.
2. Resend the print job.
Is the print quality still poor?
Contact technical
support.
The problem is solved.
Uneven print density