User's Guide
- 33 -
9. Click the folder icon.
10. Select the PPD file.
11. Click Open > Forward > Apply.
Adding the Printer on the CUPS Administration Web page
1. Connect the machine to a computer or the network.
2. Start up the Web browser.
3. Enter the URL “http://localhost:631”.
4. Click Add Printer.
5. Enter the Printer name, Location, and Description > Continue.
6. Select a Device Port from the Device list > Continue.
7. For a USB connection, skip to step 9.
Enter the device URI in the following form: "socket://<Printer IP or Printer Hostname>:port"
8. Click Continue.
9. Select Generic > Continue.
10. Select MF402-1X.ppd > Add Printer.
11. Enter the user name and password for using root privileges > OK.
Preparing to set up the printer on a wireless network
Notes:
• Make sure your wireless network adapter is installed in your printer and working properly. For more
information, see the instruction sheet that came with the wireless network adapter.
• Make sure your access point (wireless router) is turned on and is working properly.
Make sure you have the following information before setting up the printer on a wireless network:
• SSID—The SSID is also referred to as the network name.
• Wireless Mode (or Network Mode)—The mode is either infrastructure or ad hoc.
• Channel (for ad hoc networks)—The channel defaults to automatic for infrastructure networks.
Some ad hoc networks will also require the automatic setting. Check with your system support person
if you are not sure which channel to select.
To Next Page
Loading...
