Develop ineo 3320 - Large Jobs Do Not Collate

User's Guide
- 234 -
Action
Yes
No
Step 2
1. From the Paper menu on the printer control panel, set the paper size
and type to match the paper loaded in the tray.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Go to step 3.
Step 3
1. Depending on your operating system, open Printing Preferences or the
Print dialog, and then specify the paper type.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Go to step 4.
Step 4
1. Check if the trays are not linked.
2. Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is
solved.
Contact technical
support.
Large jobs do not collate
Action
Yes
No
Step 1
1. From the Finishing menu on the printer control panel, set Collate to “(1,2,3)
(1,2,3).”
2. Resend the print job.
Did the job print and collate correctly?
The problem
is solved.
Go to step 2.