Develop ineo 3320 - Page 235

User's Guide
- 235 -
Action
Yes
No
Step 2
1. From the printer software, set Collate to “(1,2,3) (1,2,3).”
Note: Setting Collate to “(1,1,1) (2,2,2)” in the software overrides the
setting in the Finishing menu.
2. Resend the print job.
Did the job print and collate correctly?
The problem
is solved.
Go to step 3.
Step 3
Reduce the complexity of the print job by eliminating the number and size of
fonts, the number and complexity of images, and the number of pages in the
job.
Did the job print and collate correctly?
The problem
is solved.
Contact
technical
support
.
Multiple-language PDF files do not print
Action
Yes
No
Step 1
1. Check if the print options for the PDF output are set to embed all
fonts.
For more information, see the documentation that came with
Adobe Acrobat.
2. Generate a new PDF file, and then resend the print job.
Do the files print?
The problem is
solved.
Go to step 2.
Step 2
1. Open the document you want to print in Adobe Acrobat.
2. Click File >Print >Advanced >Print As Image >OK >OK.
Do the files print?
The problem is
solved.
Contact technical
support.