Develop ineo 3320 - Supported Paper Sizes, Types, and Weights

User's Guide
- 53 -
• Do not use coated papers unless they are specifically designed for electrophotographic printing.
Selecting preprinted forms and letterhead
Use these guidelines when selecting preprinted forms and letterhead:
• Use grain long for 60 to 90 g/m
2
(16 to 24 lb) weight paper.
• Use only forms and letterhead printed using an offset lithographic or engraved printing process.
• Avoid papers with rough or heavily textured surfaces.
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must be able
to withstand temperatures up to 230°C (446°F) without melting or releasing hazardous emissions. Use
inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based generally meet
these requirements; latex inks might not. When in doubt, contact the paper supplier.
Preprinted papers such as letterhead must be able to withstand temperatures up to 230°C (446°F)
without melting or releasing hazardous emissions.
Supported paper sizes, types, and weights
Supported paper sizes
Paper size and
dimension
Standard 250-
sheet tray
Optional 250-
or 550-sheet
tray
Multipurpose
feeder
ADF Scanner
glass
Duplex
mode
Business card
X
X
X
X
X
3 x 5 in.
X
X
X
X
4 x 6 in.
X
X
X
X
A4
210 x 297 mm
(8.27 x 11.7 in.)
A5
148 x 210 mm
(5.83 x 8.27 in.)
X
A6
105 x 148 mm
(4.13 x 5.83 in.)
X
X