Develop ineo 3320 - Making a Copy Lighter or Darker; Adjusting Copy Quality

User's Guide
- 71 -
Making a copy lighter or darker
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass in the upper left corner.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Darkness > adjust the darkness setting > select the number of copies or enter a
number on the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
.
4. Press the left or right arrow button to scroll to Finish the Job, and then press
.
Adjusting copy quality
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Content Type > select the content type of the original document
4. Press the left or right arrow button to scroll to one of the following:
- Text—The content of the original document is mostly text or line art.
- Text/Photo—The original document is a mixture of text and graphics or photos.
- Photo—The original document is mostly a photo or an image.
- Graphics—The original document is mostly business-type graphics, such as pie charts, bar
charts, and animations.