Develop ineo 3320 - Reducing or Enlarging Copies

User's Guide
- 70 -
3. From the printer control panel, navigate to:
>Copy > >Sides (Duplex) > select a duplex option > select the number of copies or enter a
number on the keypad >
Notes:
- The first number refers to the original document. The second number refers to the copy. For
example, select 1-sided to 2-sided if you have one-sided original documents and you want two-
sided copies.
- If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
.
4. Press the left or right arrow button to scroll to Finish the Job, and then press
.
Reducing or enlarging copies
Copies can be scaled from 25% to 400% of the original document size.
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Scale > adjust the scale setting > select the number of copies or enter a number
on the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
.
4. Press the left or right arrow button to scroll to Finish the Job, and then press
.