User's Guide
- 208 -
3. Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of the paper.
[x]-page jam, open automatic feeder top cover. [28y.xx]
1. Remove all original documents from the ADF tray.
Note: The message is cleared when the pages are removed from the ADF tray.
2. Open the ADF cover.
3. Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4. Close the ADF cover.
5. Straighten the edges of the original documents, then load the original documents into the ADF, and
then adjust the paper guide.
To Next Page
Loading...
