Develop ineo 3320 - Ipv6 Menu

User's Guide
- 125 -
IPv6 menu
To access the menu, navigate to either of the following:
• Network/Ports >Standard Network >Standard Network Setup >IPv6
• Network/Ports >Network [x] >Network [x] Setup >IPv6
Note: This menu is available only in network printers or printers that are attached to print servers.
Use
To
Enable IPv6
On
Off
Enable IPv6 in the printer.
Note: On is the factory default setting.
Auto Configuration
On
Off
Specify whether or not the wireless network adapter accepts the
automatic IPv6 address configuration entries provided by a router.
Note: On is the factory default setting.
View Hostname
Set the host name.
Note: These settings can be changed only from the Embedded Web
Server.
View Address
View Router Address
Enable DHCPv6
On
Off
Enable DHCPv6 in the printer.
Note: On is the factory default setting.