Develop ineo 3320 - 3 Additional Printer Setup; Installing Internal Options

User's Guide
- 19 -
3—Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
Available internal options
• Memory cards
- UK-P01 Upgrade Kit 256MB User Flash
• Font
- UK-P06 Upgrade Kit Traditional Chinese Font Card
- UK-P05 Upgrade Kit Simplified Chinese Font Card
- UK-P04 Upgrade Kit Korean Font Card
- UK-P07 Upgrade Kit Japanese Font Card
• Internal Solutions Ports (ISP)
- NC-P03 network Interface Card Marknet 8352 Wireless
Accessing the controller board
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have any other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.