Develop ineo 3320 - Page 249

User's Guide
- 249 -
Action
Yes
No
Step 3
1. Depending on your operating system,
specify the paper type and weight from
Printing Preferences or from the Print
dialog.
2. Resend the print job.
Do print irregularities still appear?
Go to step 4.
The problem is solved.
Step 4
Check if the paper loaded in the tray has
texture or rough finishes.
Are you printing on textured or rough paper?
From the printer control panel, set
the paper texture in the Paper
menu to match the paper loaded in
the tray.
Go to step 5.
Step 5
1. Load paper from a fresh package.
Note: Paper absorbs moisture due to
high humidity. Store paper in its original
wrapper until you use it.
2. Resend the print job.
Do print irregularities still appear?
Go to step 6. The problem is solved.
Step 6
Replace the imaging unit, and then resend
the print job.
Do print irregularities still appear?
Contact technical support.
The problem is solved.