Develop ineo 160 - Output Paper Size; Fit to Paper; Output Paper List; Scaling

5
Configuring printer driver settings
5-16 ineo 160
5.4.2 Output Paper Size
Use the settings in this group box to specify the size of paper you want to
use for printing. You can also configure other settings that affect the size of
the print image on the paper.
2
Note
Output Paper Size
group box settings are not available whenever the N-
up
setting on the “Setup” tab is anything besides “Off”.
Fit to Paper
Selecting this check box causes the printed image to be resized automati-
cally so it matches the size selected in the Output Paper Size list.
2
Note
The Fit to Paper check box is not available if Scaling is set to any setting
other than 100 %.
Output Paper List
To specify a paper size that is different from the size specified under Original
Document Size, click the down arrow button, and then select a paper size
from the list that appears.
Scaling
Specify the zoom ratio for enlarging or reducing the print image.
Type or select a value between 35 % and 400 %.
2
Note
Scaling is not available while the Fit to Paper check box is selected.