Develop ineo+ 454 - Preview Display Conditions (Standard Application)]; Function Mode Initial; Scan File Name Settings

ineo+ 224/284/364/454/554 7-13
7
[Preview Display Conditions (Standard Application)]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings] - [Preview Display Con-
ditions (Standard Application)]
Select the conditions for displaying preview images.
[Preview Display Conditions (Registered Application)]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings] - [Preview Display Con-
ditions (Registered Application)]
Select conditions to display preview images when using an OpenAPI application.
[Scan File Name Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Scan File Name Settings]
Press this button to change the default file name of scanned original data when saving it.
The file name is:"initial of the function" + "text to be added" + "date" + "sequential number" + "page number"
+ "file extension".
[Function Mode Initial]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Scan File Name Settings] - [Function Mode
Initial]
Select whether to use an initial of the relevant function as a prefix for the file name. The following letters are
used as prefixes for file name.
C: Copy
S: Fax/Scan, User Box
P: Print
[Attach] is selected by default.
Settings Description
[Jobs Executed] Shows a preview image when pressing Start to execute a job as well as
when pressing Preview.
[Preview Settings Screen] Shows a preview image only when Preview is pressed.
[Preview Settings Screen] is specified by default.
Settings Description
[Jobs Executed] Shows a preview image when pressing Start to execute a job as well as
when pressing Preview.
[Preview Settings Screen] Shows a preview image only when Preview is pressed.
[Preview Settings Screen] is specified by default.
[Use Standard App. Set-
tings]
Follows the setting of [Preview Display Conditions (Standard Application)].
Settings Description
[Function Mode Initial] Select whether to use an initial of the relevant function as a prefix for the
file name.
For details, refer to page 7-13.
[Supplementary File Name] Select whether to add a device name or desired text to the file name. To
add desired text, enter it.
For details, refer to page 7-14.