7
7-24 ineo+ 224/284/364/454/554
[Number of Redials]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Number of Redials]
If the machine fails to send a fax successfully, it automatically redials the same destination after the elapse
of a certain period of time. If necessary, change the number of redials.
(The setting range varies according to the local standards.)
[Redial Interval]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting] - [Redial Interval]
If necessary, change the redial intervals when you specified a value in [Number of Redials].
[3 min.] is selected by default.
[TX/RX Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings]
Specify how to print faxes received and how to handle files in a polling transmission.
[Number of Redials] If the machine fails to send a fax successfully, it automatically redials the
same destination after the elapse of a certain period of time. If necessary,
change the number of redials.
For details, refer to page 7-24.
[Redial Interval] If necessary, change the redial intervals when you specified a value in
[Number of Redials].
For details, refer to page 7-24.
[Line Monitor Sound] Select whether to play sounds on the telephone line from speakers during
fax communication.
For details, refer to [User's Guide: Fax Operations].
[Line Monitor Sound Vol-
ume (Send)]
If necessary, adjust the speaker volume for sending when [Line Monitor
Sound] is set to [ON].
For details, refer to [User's Guide: Fax Operations].
[Line Monitor Sound Vol-
ume (Receive)]
If necessary, adjust the speaker volume for receiving when [Line Monitor
Sound] is set to [ON].
For details, refer to [User's Guide: Fax Operations].
Settings Description
Settings Description
[Duplex Print (RX)] Select whether to print an original on both sides of sheets of paper when a
fax having multiple pages is received.
For details, refer to page 7-25.
[Letter/Ledger over A4/A3] Select whether to preferentially print an original on inch-sized paper when
a fax is received.
For details, refer to page 7-25.
[Print Paper Selection] Select the criterion of selecting paper for printing a fax.
For details, refer to page 7-25.
[Print Paper Size] Select the paper size to print received faxes on.
For details, refer to page 7-25.
[Incorrect User Box No. En-
try]
Select the action taken by the machine if an unregistered user box is spec-
ified for receiving a fax using the machine's box.
For details, refer to [User's Guide: Fax Operations].
[Tray Selection for RX Print] Specify a paper tray if you want to fix the paper tray used to print a fax.
For details, refer to page 7-26.
[Min. Reduction for RX
Print]
If necessary, change the reduction ratio that is used when printing a fax.
For details, refer to page 7-26.
[Print Separate Fax Pages] Select whether to print a fax longer than the standard size on separate pag-
es.
For details, refer to page 7-26.
To Next Page
Loading...
