Develop ineo+ 454 - Function On;Off Setting; Destination Check Display Function; Memory Rx Setting

ineo+ 224/284/364/454/554 7-27
7
[Function ON/OFF Setting]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
Enable or disable fax transmission and reception functions, such as Confirm Address that prevents wrong
fax transmission, F-Code TX, and Relay RX.
[Destination Check Display Function]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
- [Destination Check Display Function]
Select whether to show a list of specified destinations before sending a fax.
Select [ON] if you want to check destinations before sending a fax. Using this function helps to prevent in-
correct transmission and failure to send faxes.
[OFF] is specified by default.
[Memory RX Setting]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Memory RX Setting]
Configure the settings for using the Memory RX function.
Memory RX is a function to save a received fax to Memory RX User Box of this machine.
[PC-Fax RX Setting] Configure the settings for using the PC-Fax RX function.
For details, refer to [User's Guide: Fax Operations].
[TSI User Box Setting] Configure the settings for using the TSI Routing function.
For details, refer to [User's Guide: Fax Operations].
Settings Description
Settings Description
[F-Code TX] Select whether to use the F-Code TX function.
F-Code TX is a function that send documents to a destination by entering
a SUB address and a password (communication password) of a specific
user box. The remote machine must support the F-Code TX/RX.
For details, refer to [User's Guide: Fax Operations].
[Relay RX] Select whether to use this machine as a fax relaying station.
If this machine is used as a relaying station, it is possible to receive a fax
from a remote machine and automatically relay it to multiple programmed
destinations.
For details, refer to [User's Guide: Fax Operations].
[Relay Printing] Select whether to distribute and print a received fax when this machine is
used as a fax relaying station.
For details, refer to [User's Guide: Fax Operations].
[Destination Check Display
Function]
Select whether to show a list of specified destinations before sending a fax.
For details, refer to page 7-27.
[Confirm Address (TX)] Select whether to require the user to enter a fax number twice to send a
fax by directly entering the fax number.
For details, refer to [User's Guide: Fax Operations].
[Confirm Address (Regis-
ter)]
Select whether to require the user enter a fax number twice to register it
when, for example, registering a destination or forwarding destination.
For details, refer to [User's Guide: Fax Operations].
Settings Description
[Memory RX User Box
Password]
To use the Memory RX function, tap [No] to deselect it. In addition, specify
the password to restrict an access to the Memory RX User Box with up to
eight digits.
[No] is specified by default.