Develop ineo+ 454 - Manual Destination Input; Restrict Fax Tx

ineo+ 224/284/364/454/554 7-35
7
[Manual Destination Input]
To display: [Utility] - [Administrator Settings] - [Security Settings] - [Security Details] - [Manual Destination In-
put]
Select whether to allow the user to directly enter destinations.
[Restrict Fax TX]
To display: [Utility] - [Administrator Settings] - [Security Settings] - [Security Details] - [Restrict Fax TX]
Select whether to restrict fax transmissions.
If [ON] (Restrict) is selected, the fax functions no longer appear in fax/scan mode.
[OFF] (Allow) is specified by default.
[Display Activity Log] Select whether to show the activity log on Scan, Fax TX and RX.
For details, refer to [User's Guide: Copy Operations].
[Initialize] Initializes the settings in [Job History], [Copy Program], [Network Settings],
and [Address Registration].
For details, refer to [User's Guide: Copy Operations].
[Secure Print Only] Specify whether the printing from the computer should be limited only to
the security document.
For details, refer to [User's Guide: Print Operations].
[Copy Guard] Select whether to use the Copy Guard function.
The Security Kit is required to use the Copy Guard function.
For details, refer to [User's Guide: Copy Operations].
[Password Copy] Select whether to use the Password Copy function.
To use the Password Copy function, the Security Kit is required.
For details, refer to [User's Guide: Copy Operations].
[Web browser contents ac-
cess]
Select whether to allow an access to the Web page contents saved on the
hard disk of this machine.
For details, refer to [User's Guide: Copy Operations].
[TX Operation Log] Select whether to obtain an operation log on the Control Panel when
scanning or sending a fax as a send operation log. This helps to analyze a
security issue if it occurs.
For details, refer to [User's Guide: Copy Operations].
Settings Description
Settings Description
[Allow All] Allows the direct input of destinations.
[Allow All] is specified by default.
[Individual Allowance] Select whether to allow direct input for each function.
[Restrict] Prohibits the direct input of destinations. Hides [Direct Input] on the main
screen in scan/fax mode.