Multi Sensor Management (COACH USE
ONLY)
BLE provides coaches who use multiple sensors with their team, easy ways to
manage all of these sensors. If you do not use multiple sensors for a team, this
section does not apply to you.
The first step for managing multiple sensors is to Assign the sensors to players. You can learn how to do
this here: Assign Sensors to Players
After assigning the sensors to players, you can do Bulk Transfers for disconnected swings.
You are also able to do Bulk DFU Updates on BLE. For this, your sensors do not need to be assigned.
Not sure if you’ve been updated to BLE? You’re sensor will need to have a Firmware
Version of at least: 8.5.2
To learn how to check your Firmware Version: click here
*
If you don’t have BLE and want to learn more about it and how to update, click here
*
Diamond Kinetics SwingTracker - 1
Page 24 of 107
To Next Page
Loading...
