DIG LEIT-1 User Manual

6. Press again, the second start time and OFF (or the last start time
programmed) appear flashing.
7. To set the desired second start time hour (note AM and PM designations), press
or .
8. Press
again and the minutes begin flashing, press or to select the
watering start time in minutes. Repeat the steps to set the third and if needed
the fourth and fifth start times. During programming, the screen also shows
which days the controller will operate.
Press the
button to proceed to the next step RUN TIME or to review
the program.
13

DIG LEIT-1 Specifications

General

Brand	DIG
Model	LEIT-1
Category	Controller
Language	English