Digi ConnectCore Series - Mechanical Specifications

ConnectCore for i.MX51
©2011DigiInternational,Inc. 124
Mechanical Specifications
Fasteners and Appropriate Torque
Digi’s recommendation is to use a M2x8mm PCB standoff with a slotted cheese head screw,
DIN 84, M2x04, 6MM (Digi P/N MA00898) in combination with a flat washer, DIN 125, M2, Nylon
6 (Digi P/N MA01617). Additionally, the use of a torque key with 10 cNm is recommended.
Warning: Do not use a standard metal M2 washer.
Environmental Specifications
 Length:
82 mm (3.228 inches)
 Width:
50 mm (1.968 inches)
 Height :
– PCB:
1.40 mm (0.055 inches)
– Top side part:
3.60 mm (0.142 inches)
– Bottom side part:
2.20 mm (0.087 inches)
 Operating temperature:
600MHz variant:
-40ºC to +85ºC (-40ºF to +185ºF)
800MHz variant:
-20ºC to +70ºC (-4ºF to +158ºF)
 Storage temperature:
-40ºC to +125ºC (-40ºF to +257ºF)