ConnectCore for i.MX51
©2011DigiInternational,Inc. 17
70 HSGPIO27 DISP2_DATA5 i.MX51: DISP2_DATA5 LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
71 GPIO27 DISP2_DATA8/
MII_TXD3/
USBH3_DATA0
i.MX51: DISP2_DATA8
ETH_PHY: TDX3
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
72 GPIO27 DISP2_DATA7/
MII_TXD2/UBH3_NXT
i.MX51: DISP2_DATA7
ETH_PHY: TDX2
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
73 GPIO27 DISP2_DATA10/
MII_COL/
USBH3_DATA2
i.MX51: DISP2_DATA10
ETH_PHY: COL
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
74 GPIO27 DISP2_DATA9/
MII_TXEN/
USBH3_DATA1
i.MX51: DISP2_DATA9
ETH_PHY: TXEN
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
75 GPIO27 DISP2_DAT12/
MII_RX_DV/
USBH3_DATA4
i.MX51: DISP2_DATA12
ETH_PHY: RXDV
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
76 GPIO27 DISP2_DAT11/
MII_RX_CLK/
USBH3_DATA3
i.MX51: DISP2_DATA11
ETH_PHY: RXCLK
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
77 GPIO27 DISP2_DATA14/
MII_RXD0/
USBH3_DATA6
i.MX51: DISP2_DATA14
ETH_PHY: RXD0
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
78 GPIO27 DISP2_DAT13/
MII_TX_CLK/
USBH3_DATA5
i.MX51: DISP2_DATA13
ETH_PHY: TXCLK
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
79 GPIO27 DI2_PIN2/MII_MDC i.MX51: DI2_PIN2
ETH_PHY: MDC
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
80 GPIO27 DISP2_DAT15/
MII_TXD0/
USBH3_DATA7
i.MX51: DISP2_DATA15
ETH_PHY: TXD0
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
81 GPIO27 DI2_PIN4/MII_CRS i.MX51: DI2_PIN4
ETH_PHY: CRS
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
82 - GND - -
83 RGB IOR i.MX51: IOR Not used
84 GPIO27 DI2_DISP_CLK/
MII_RXD1
i.MX51: DI2_DISP_CLK
ETH_PHY: RXD1
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
85 RGB IOR_BACK i.MX51: IOR_BACK Not used
86 GPIO27 DI2_PIN3/MII_MDIO i.MX51: DI2_PIN3
ETH_PHY: MDIO
LCD2 Data Ethernet 1 and LCD2 cannot
be used at the same time.
87 RGB IOB i.MX51: IOB Not useD
88 IOG IOG i.MX51: IOG Not used
89 RGB IOB_BACK i.MX51: IOB_BACK Not used
Pin I/O Type Signal name Use on module Use on development board Comments
To Next Page
Loading...
Need help?
General
