Digi TransPort WR21 - At&V: View Profiles

Using the command-line interface AT commands
Digi TransPort® Routers User Guide
161
at&v: View profiles
The at&v command displays a list of the current AT command and S register values, and the settings
for the two stored profiles. For example:
at &v
CURRENT PROFI LE:
&c1 &d2 &k1 &s1 &r 0 e1 q0 v1 &y0
S0=0 S2=43 S12=50 S31=3 S45=5
st at es DTR: 1 RTS: 1
STORED PROFI LE 0:
&c1 &d2 &k1 &s1 &r 0 e1 q0 v1
S0=0 S2=43 S12=50 S31=3 S45=5
STORED PROFI LE 1:
&c1 &d2 &k1 &s1 &r 0 e1 q0 v1
S0=0 S2=43 S12=50 S31=3 S45=5
OK