Configuring IP routing and forwarding Configure IP routing parameters
Digi TransPort® Routers User Guide
432
Command Instance Parameter Values
Equivalent web
parameter
ip 0 admin_connected 0-2147483647 Connected Interfaces
ip 0 admin_static 0-2147483647 Static Routes
ip 0 admin_ebgp 0-2147483647 eBGP Routes
ip 0 admin_ospf 0-2147483647 OSPF Routes
ip 0 admin_rip 0-2147483647 RIP Routes
ip 0 admin_ibgp 0-2147483647 iBGP Routes
ip 0 inf_metric 0-2147483647 Maximum static route
metric
ip 0 route_dbcast 0-255 Route directed IP
broadcasts
ip 0 route_dly 0-2147483647 Wait s seconds before
using an alternative
route
ip 0 route_dwn 0-2147483647 If an interface is
configured for “dial on
demand” and fails to
connect, Mark a static
route as Out Of Service
for s seconds
ip 0 routeup_dly 0-2147483647 When an Always On
route becomes In
Service, wait s seconds
before using it