Digi TransPort WR21 - Page 643

Configuring legacy protocols Configure X.25 parameters
Digi TransPort® Routers User Guide
643
Option Description
0 No editing PAD service signals.
1 PAD editing service signals for printers.
2 PAD editing service signals for terminals.
20 Echo mask
Defines characters that are not echoed when echo mode has been enabled using parameter 2.
Option Description
0 No echo mask (all characters are echoed)
1 CR
2 LF
4 VT, HT or FF
8 BEL, BS
16 ESC,ENQ
32 ACK,NAK,STX,SOH,EOT,ETB,ETX
64 No echo of characters set by parameters 16, 17 & 18
128 No echo of characters set by parameters 16, 17 & 18
Combinations of the above sets of characters are possible by adding the respective values together.
21 Parity treatment
Sets use of parity generation/checking.
Option Description
0 No parity generation or checking
1 Parity checking on
2 Parity generation on
3 Parity checking and generation on
22 Page wait
Determines how many line feeds are sent to the terminal before output is halted on a page wait
condition. In other words, it defines the page length for paged mode output. A page wait condition is
cleared when the PAD receives a character from the terminal.