Digi TransPort WR21 - Page 924

Performing device administration tasks Manage X.509 certificates and host key pairs
Digi TransPort® Routers User Guide
924
Automatically re-enroll aging certificates
Select to make sure any aging certificates are re-enrolled.
SCEP Server IP address
The IP address of the SCEP server / CA server.
Port
The port on which the SCEP server is listening. If the port is 0, the router uses the default port of 80.
Path
The path on the server to the SCEP application. You can either enter your own path or select from cgi-
bin or Microsoft SCEP from the drop-down list.
Application
The SCEP application running on the server.
CA identifier
The identifier for the CA server. The CA identifier to use to identify a particular CA when multiple CAs
might be running on the server.
CA certificate
The filename of the CA certificate.