Page 30
5.6 TIME / CHRONOGRAPH
The following time and chronograph information can be shown by
the Digifly instrument:
“rt”: UTC time.
“ch”: Chronograph.
Time or chronograph data can be shown in any of customizable
display fields (e.g. on the Thermal Display screen highlighted here
in red).
To show additional time information in any of these customizable
fields, press the
,
keys to highlight & select the data field you wish to adjust.
As you scroll up or down, the fields that you can customize are highlighted (inverted)
and a description of the data currently being shown is that field is shown for approx 3
seconds.
To change the data you wish to display, press the
,
key. Each time the data field
is changed, the field briefly shows a description of the data type currently selected.
To zero the chronograph, press the
key (long press).
The vario time and date are automatically synchronized with the GPS at start up.
Adjust the time zone difference for your country go (MAIN SETUP \ n. 15 UTCO).
To manually adjust the time and date, go to (MAIN SETUP \ n. 16 HOUR), (MAIN SETUP \
n. 17 MIN), (MAIN SETUP \ n. 18 DAY), (MAIN SETUP \ n. 19 MONT), (MAIN SETUP \ n.
20 YEAR).
5.7 PILOT NAME & GLIDER DATA
To set the pilot name, the glider type and the glider id, go (MAIN SETUP \ n. 21 PILO),
(MAIN SETUP \ n. 26 GTYP), (MAIN SETUP \ n. 27 GID).
To Next Page
Loading...
Need help?
General
