Digisol DG-BG100 User Manual

DG-BG1000 User Manual
15
7. Configure the ADSL setting for the router in the following screen. Select the
country and service provider from the drop-down list. You can change the default
VPI/VCI values as instructed by your ISP.
VPI: The valid value is in the range of 0 to 255.
VCI: The valid value is in the range of 32 to 65535.
Click ‘Next’ to continue with the installation.
8. In the following screen, select the WAN protocol. Click ‘Next’, to proceed with the
installation.

Digisol DG-BG100 Specifications

General

Brand	Digisol
Model	DG-BG100
Category	Network Router
Language	English