DG-BG1000 User Manual
54
3.5.2.4 Virtual Server
Click Virtual Server in the left pane, the page shown in the following figure
appears.
The following table describes the parameters of this page:
Parameter Description
Service Type
You can select the common service type, for
example, AUTH, DNS, or FTP. You can also define
a service name.
If you select Usual Service Name, the
corresponding parameter has the default
settings.
If you select User-defined Service Name, you
need to enter the corresponding parameters.
Protocol
Choose the transport layer protocol that the service
type uses. You can choose TCP or UDP.