Digisol DG-BG100 - ATM Loopback; Adsl

DG-BG1000 User Manual
80
3.8.2 ATM Loopback
Choose Diagnostic > ATM Loopback. The page shown in the following figure
appears. In this page, you can use VCC loopback function to check the connectivity
of the VCC. The ATM loopback test is useful for troubleshooting problems with the
DSLAM and ATM network.
Click Run Loopback to start testing.
3.8.3 ADSL
Choose Diagnostic > ADSL. The page shown in the following figure appears. It is
used for ADSL tone diagnostics.
Click Start to start ADSL tone diagnostics.