Digisol DG-BG100 User Manual

DG-BG1000 User Manual
78
3.7.5 Time Zone
Choose Admin > Time Zone, the page shown in the following figure appears. You
can configure the system time manually or get the system time from the time
server.
The following table describes the parameters of this page:
Parameter Description
System Time Set the system time manually.
NTP Configuration
State
Select enable or disable NTP function. You need
to enable NTP if you want to configure the
parameters of NTP.
Primary Server Set the primary NTP server manually.
Secondary Server Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from
the drop down list.

Digisol DG-BG100 Specifications

General

Brand	Digisol
Model	DG-BG100
Category	Network Router
Language	English