DG-BG1000 User Manual
37
Parameter Description
DHCP Mode
If set to DHCP Server, the router can assign IP
addresses, IP default gateway and DNS Servers to
the host in Windows95, Windows NT and other
operation systems that support the DHCP client.
IP Pool Range
It specifies the first and the last IP address in the IP
address pool. The router assigns IP address that is in
the IP pool range to the host.
Show Client
Click it, the Active DHCP Client Table appears. It
shows IP addresses assigned to clients.
Default Gateway Enter the default gateway of the IP address pool.
Max Lease Time
The lease time determines the period that the host
retains the assigned IP address before the IP
address is changed.
Domain Name
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system
name) on each individual PC. The domain name can
be assigned from the router through the DHCP
server.
DNS Servers
You can configure the DNS server IP addresses for
DNS Relay.
Set VendorClass
IP Range
Click it, the Device IP Range Table page appears.
You can configure the IP address range based on the
device type.
To Next Page
Loading...
Need help?
General
