DG-BG1000 User Manual
41
3.4.1.3 DHCP Static IP
Click DHCP Static IP in the left pane, the page shown in the following figure
appears. You can assign the IP addresses on the LAN to the specific individual
PCs based on their MAC address.
The following table describes the parameters and buttons of this page:
Parameter Description
IP Address Enter the specified IP address in the IP pool
range, which is assigned to the host.
MAC Address Enter the MAC address of a host on the LAN.
Add After entering the IP address and MAC address,
click it. A row will be added in the DHCP Static IP
Table.
Delete Selected Select a row in the DHCP Static IP Table, then
click it, this row is deleted.
Reset Click it to refresh this page.
DHCP Static IP Table It shows the assigned IP address based on the
MAC address.
To Next Page
Loading...
