DG-BG1000 User Manual
49
3.5.1.1 DNS
Click DNS in the left pane, the page shown in the following figure appears.
The following table describes the parameters and buttons of this page:
Parameter Description
Obtain DNS
Automatically
Select it, the router accepts the first received DNS
assignment from one of the PPPoA, PPPoE or MER
enabled PVC(s) during the connection establishment.
Set DNS
Manually
Select it, and then enter the IP addresses of the
primary and secondary DNS server.
Apply Changes Click it to save the settings of this page.
Reset Click it to start configuring the parameters in this page.
3.5.1.2 DDNS
Click DDNS in the left pane, the page shown in the following figure appears. This
page is used to configure the dynamic DNS address from DynDNS.org or TZO.
You can add or remove to configure dynamic DNS.
To Next Page
Loading...
