DG-HR3400 User Manual
39
then the router will do nothing when the hosts request an IP
utes
LAN Interface Setup:
If you choose "None",
address.
(2) This page lists the fixed IP/MAC address on your LAN. The device distrib
the number configured to hosts on your network as they request Internet access.
Here is the description of every setup item:
Parameter Description
IP address Please input the IP address of this router.
Subnet Mask Please input subnet mask for this network.
DHCP Server Settings:
These settings are only available when ‘DHCP Server’ in ‘LAN IP’ section is
‘Enabled’, and here is the description of every setup item.
Parameter Description
DHCP Mode
Enable or Disable the DHCP Server.
IP Pool Range These two IP values (from and to) define a range of IP
addresses that the DHCP Server uses when assigning ad
to computers and devices on your Local Area Network. Any
address that does not fall in this range are not managed by the
DHCP Server; these could, therefore, be used for ma
configured devices or devices that cannot use DHCP to obtain
dresses
nually
To Next Page
