DG-HR3400 User Manual
4-4-8 Diagnostics-Traceroute
This page is used to traceroute diagnostic. Diagnostic traceroute can check network
reachab te path between user and the host under check.
Choose menu “Mainten
displayed.
le or not, and find the rou
ance→Diagnostics Traceroute”, below given screen will be
Here is the description of every setup item:
Parameter Description
Host Type the destination IP address.
Numberoftries Type the number of tries.
Timeout Set the waiting time for the reply of each packet. If there is no
r nection is overtime. eply in the specified time, the con
Datasize The size of packet.
DSCP Configure the DSCP parameters.
MaxHopCount The max number of hops for a traceroute connection.
Interface By selecting the Interface type.
78
To Next Page
