Digisol DG-WA3002NP User Manual

DG-WA30002NP User Manual
 Connect one end of the network cable to the LAN port on the Router and the
other end to the PoE switch. From the PoE switch connect a cable to the AP.
Power ON the router, the AP and the PoE switch. Ensure that all the LED’s
on the Access Point are ON. If not, try the above steps again else click ‘Next’
to continue.
15

Digisol DG-WA3002NP Specifications

General

Brand	Digisol
Model	DG-WA3002NP
Category	Wireless Access Point
Language	English