DG-WA30002NP User Manual
70
er) by checking ‘Enable 802.1x
Authentication’ box when
ou select ‘Disable’ or ‘WEP’ as encryption type, and the following message
2-7-5 802.1x Authentication
You can enable 802.1x user identification (based on RADIUS user
authentication serv
y
will be displayed:
Here is the description of every setup item:
Parameter Description
Enable 802.1x
Authentication
Enables or disables the use of 802.1x user authentication.
RADIUS Server IP
address
Please input the IP address of RADIUS authentication
server here.
RADIUS Server
Port
Please input the port number of RADIUS authentication
server here. Default value is 1812.
RADIUS Server
assword
Please input the password of RADIUS authentication
server here. P
To Next Page
Loading...
