Digisol DG-WA3002NP User Manual

DG-WA30002NP User Manual
25
2-2 Connecting to wireless Access Point using web browser
After the network connection is setup, next step is to setup the Access Point
with proper network parameters, so it can work properly in your network
environment.
Please use the web browser to configure the Access Point. A computer with
wired Ethernet connection to the Access Point is required for this first-time
configuration.
Before you start to configure the Access Point, please configure the IP
address of the computer in the same network class as that of the Access Point.
If the operating system of your computer is….
Windows 95/98 - please go to
section
2-2-1
Windows 2000 - please go to section
2-2-2
Windows XP - please go to section
2-2-3
Windows Vista - please go to section
2-2-4

Digisol DG-WA3002NP Specifications

General

Brand	Digisol
Model	DG-WA3002NP
Category	Wireless Access Point
Language	English