Digisol DG-WA3002NP User Manual

DG-WA30002NP User Manual
2-2-4 Windows Vista IP address setup
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Click on ‘View Network Status
and Tasks’, and then click on ‘Manage Network Connections’. Right-
click ‘Local Area Connection’, then select ‘Properties’. Local Area
Connection Properties window will appear, select ‘Internet Protocol
Version 4 (TCP / IPv4), and then click ‘Properties’
32

Digisol DG-WA3002NP Specifications

General

Brand	Digisol
Model	DG-WA3002NP
Category	Wireless Access Point
Language	English