DG-WA30002NP User Manual
2-4-2 Station-Infrastructure
In this mode, you can connect the Access Point to Ethernet devices such as
TV and Game player to enable the Ethernet device to act as a wireless station
and connect to a wireless network through an Access Point or AP router.
Here is the description of every setup item:
Parameter Description
Band Please select the wireless band you wish to use. By
selecting different band settings, you’ll be able to allow
or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G),
only wireless clients using the wireless band you select
(802.11b, 802.11n or 802.11g) will be able to connect
to this Access Point.
If you select 2.4GHz (B+G), then only wireless clients
using 802.11b and 802.11g bands will be able to
connect to this Access Point.
If you want to allow 802.11b, 802.11g, and 802.11n
clients to connect to this Access Point, select 2.4GHz
(B+G+N).
Main ESSID Please input the ESSID (the name used to identify this
wireless Access Point) here. You can input up to 32
alphanumerical characters. PLEASE NOTE THAT
ESSID IS CASE SENSITIVE.
42
To Next Page
Loading...
Need help?
General
