Digisol DG-WA3002NP - Product Information; Product Introduction and Features

DG-WA30002NP User Manual
8
1. Product Information
1-1 Product Introduction
Thank you for purchasing DG-WA3002NP wireless LAN Access Point with PoE! With
this high cost-efficiency wireless Access Point, computers and wireless devices which
are compatible with IEEE 802.11n can connect to existing wired Ethernet network, at
the speed of up to 300Mbps. DG-WA3002NP also supports power over ethernet which
helps in easy installation, by eliminating the need of a dedicated power source for the
access point.
With Quick Setup installation procedure, any computer user can setup a wireless
network environment in very short time - within minutes, even inexperienced users.
Just follow the instructions given in this user manual, you can complete the setup
procedure.
Other features of this Access Point include:
 Complies with IEEE 802.11b/g/n wireless network standards - works with
other 802.11b/g/n wireless devices.
 Complies with 802.3af PoE standard.
 High speed wireless network, six times faster than conventional 802.11g
wireless network (up to 300Mbps).
 Allows wireless devices to connect to existing wired network and share
network resources.
 Supports 64/128-bit WEP, WPA, and WPA2 wireless data encryption.
 Supports 802.1x authentications.
 Supports MAC address filtering (Only allows specific wireless device of your
choice to connect to this Access Point).
 Supports DHCP server function.
 Supports point-to-point and point-to-multi point bridge function.
 Supports WDS (Wireless Distributed System) repeater mode.
 Supports Universal Repeater mode.
 Supports AP Client mode.