DG-WA30002NP User Manual
2-4-2-1 Wireless Site Survey
The table will list the Access Points nearby, as the Access Point is set to
Station mode; you can select one of the Access Points to associate.
Here is the description of every setup item:
Parameter Description
Select Click the radio button to select the Access Point.
SSID Displays the SSID name of the Access Point.
BSSID Displays the BSSID (MAC Address) of the Access
Point.
Band Displays current radio band of the access point.
Channel Displays current wireless channel number of the access
point.
Type Display the wireless modes include 11b, 11b/g or
11b/g/n or 11n only of the access points.
Encryption Displays the encryption setting of the Access Points. If
you have selected the Access Point with security setting,
you have to go to section
‘2-7 Wireless Security’ to set
the same security with the Access Point you want to
associate.
Signal The signal strength of each Access Point will be
displayed here. Stronger the signal strength, better is the
connection quality.
Refresh Click this button to refresh the table.
Done Select an access point and click this button to choose the
network. The SSID name of the access point you have
selected will be displayed in the Main SSID in the Basic
44
To Next Page
Loading...
Need help?
General
