DG-WA30002NP User Manual
Site Survey When you use this Access Point as a wireless station
for Ethernet network device to have wireless capability,
you have to associate it with a working Access Point.
Click ‘Select Site Survey’ button, then a “Wireless Site
Survey Table” will pop up. It will list all available
Access Points near by. You can select one Access Point
in the table and it will join wireless LAN through this
Access Point. Please go to Section
2-4-2-1 for more
information about the ‘Wireless Site Survey Table’.
After you finish with setting, please click ‘Apply’, and the following message
will be displayed:
When you see this message, the settings you made are successfully saved.
You can click on ‘Continue’ button to go back to previous page and continue
with other settings, or click ‘Apply’ button to restart the wireless Access Point
and the changes will take effect after about 30 seconds
43
To Next Page
Loading...
Need help?
General
