DG-WA30002NP User Manual
66
Encryption Key 1
multiple WEP keys,
Input WEP key characters here, the number of
characters must be the same as the number
displayed at ‘Key Format’ field. You can use any
alphanumerical characters (0-9, a-z, and A-Z) if
you select ‘ASCII’ key format, and if you select
‘Hex’ as key format, you can use characters 0-9, a-
f, and A-F. You must enter at least one encryption
key here, and if you entered
they should not be the same.
Enable 802.1x
Authentication refer to Section
Check this box to enable 802.1x user
authentication. Please
2-7-5 for
detailed instructions.
After you finish with the settings, please click ‘Apply’, and the following
essage will be displayed:
m
When you see this message, the settings you made are successfully saved.
You can click on ‘Continue’ button to go back to previous page and continue
with other settings, or click ‘Apply’ button to restart the wireless Access Point
nd the changes will take effect after about 30 seconds
a
To Next Page
Loading...
Need help?
General
