SmartSource Elite Series - Installation & Operations Guide
May 2019 8227 4907-005 Page 18 of 37
Insert documents into the feed hopper as shown. On Professional Elite, Expert Elite and Ultraviolet Elite
units, the feed hopper will open automatically. On Merchant Elite units, the feed hopper will need to be
opened manually by pushing back the grey flag.
Processing documents
When documents are placed in the feed hopper, the unit may begin processing automatically, or you may
need to press the start-stop button briefly to start processing. How this works depends on your document
processing software application. Documents will be fed singly from the feed hopper and stacked in the
output pocket. The unit will stop automatically when the feed hopper is empty. To continue processing,
place more documents in the feed hopper. Depending upon your application, the unit may resume
processing automatically, or you may need to press the start-stop button again to resume.
To Next Page
Loading...
Need help?
General
