SmartSource Elite Series - Installation & Operations Guide
May 2019 8227 4907-005 Page 23 of 37
Cleaning the image cameras
Be especially careful when cleaning around the image cameras. The image cameras have glass faces
which can be easily broken if a metal probe is used.
The glass faces of the image cameras may acquire a build-up of dirt and ink from the passing documents,
which affects image quality. If streaks, lines or a loss of image quality are seen, the image cameras
should be cleaned.
Open the image cover to expose the glass faces of the image cameras, as shown.
Ultraviolet Elite only:
Clean the glass faces using a soft cloth moistened with water. For stubborn stains isopropyl alcohol may
be used. Cleansing wipes pre-soaked with suitable solvent are available from Digital Check,
www.digitalcheck.com, part number 751804907. Ensure that any cleanser or solvent has been
completely wiped off or dried before closing the image cover.
To Next Page
Loading...
Need help?
General
