Digital Check SmartSource SSM1-ELITE55-IJ - Section 5: Replacement Parts and Consumables; Available Consumable and Replacement Parts

SmartSource Elite Series - Installation & Operations Guide
May 2019 8227 4907-005 Page 36 of 37
Section 5
Replacement parts / consumables
To obtain replacement parts, call 847-446-2285 or visit Digital Check, customerservice@digitalcheck.com
The following consumable parts are available:
Item
Part Number
Description
Endorser felt ,4- line
Endorser Felt-single line
8227 4203-000
8227 5914-000
Felt and holder assembly-4 line
Felt and holder assembly-single line
Feed roller and separator
kit
750850920
Complete feed roller and separator set for 1 machine.
Endorser cartridge
822120984
MS0083
4-line endorser cartridge
Single line endorser cartridge (55 DPM-built after 2017)
Feed/separator tire kit
750306904
Tires ONLY for 1 machine - 2 tan-colored feed tires,
one blue separator tire. Lower-cost option for users
who are comfortable replacing tires only.
Separator tire kit
750489908
Blue separator tires ONLY – kit of 25. Lower-cost
option for users who are comfortable replacing tires
only.
The following replacement parts are available:
Item
Part
Number
Description
FRU-Power
Supply,
Locking
connector
82156761-
000
Elite models -for models starting with serial # 900xxxxx-Identify with
locking, re-tractable connector to PCBA
FRU, Power
Supply 24V
36W
5.5x2.5mm
-for all 1-
line Ink Jet
(or no ink
jet) Elite
models,
Starting
with serial
#
918xxxxxx
82275943-
000
Power Supply with US line cord.
Power supplies are not interchangeable! FRU-48-watt power supply
(82276028-000) appearance is identical to 82275943-000 (FRU-36-Watt
Power Supply). Use caution when ordering!
SSM1-ELITE55
SS Merchant Elite-Identify with auto retract feeder
flag and gray inner cover badge.
SSM1-ELITE55-IJ
55 DPM Elite-1-Line Ink Jet
SSM1-ELITE55-SE
55 DPM Elite-SE Firmware, No Ink Jet
SSM1-ELITE55-
SEIJ
55 DPM Elite-SE Firmware, 1-line Ink Jet