Digital Projection E-Vision Laser 8500 Series Installation And Quick Start Guide

page 41
Digital Projection E-Vision Laser 7500, 8500 & 10K Series
Operating Guide
USING THE PROJECTOR
Rev D August 2017
Color menu continued from previous page
Manual Color Matching
1. Set Color Mode to
Manual Color Matching.
2. Open the Manual Color Matching
submenu.
Here you can do the following:
• Switch Auto Test Pattern On
and Off.
• Adjust Hue, Saturation
and Gain settings for each
individual color to improve the
color balance of the projected
image.
• Adjust white balance RGB
values.
• Reset all values.
Notes
For more details about the Hue,
Saturation and Gain settings,
see Color matching parameters
explained further in this guide.
Manual Color Matching
Green
Auto Test Pattern
Blue
Cyan
Magenta
Yellow
White Balance
Red
Reset
u
Off
u
u
u
u
u
u
Manual Color Matching — Red
Hue
Gain
Saturation
100
100
100
Manual Color Matching — White
Red
Blue
Green
100
100
100

Digital Projection E-Vision Laser 8500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 8500 Series
Category	Projector
Language	English