page 40
Digital Projection E-Vision Laser 7500, 8500 & 10K Series
Operating Guide
USING THE PROJECTOR
Rev D August 2017
Color Mode
The projector can work in the following color modes: ColorMax, Manual Color Matching,
Color Temperature and Gains and Lifts.
ColorMax
1. Set Color Mode to ColorMax.
2. Navigate to the ColorMax setting. Choose from HDTV, Peak, User 1 and User 2.
User 1 and User 2 are user-dened color gamuts set via the Setup > ColorMax menu.
Color
Color Mode
ColorMax
Color Space
Manual Color Matching
Gains and Lifts
Color Temperature
Auto
ColorMax
ColorMax
Manual Color Matching
Color Temperature
Gains and Lifts
Notes
Only one color mode can be
selected at a time. Settings used by
the other color modes are disabled.
See Setup menu for further
information about setting up the
User 1 and User 2 color gamuts.
Color
Color Mode
ColorMax
Color Space
Manual Color Matching
Gains and Lifts
Color Temperature
Auto
ColorMax
Peak
HDTV
Peak
User 1
User 2