DigiTech RP1000 - MANUAL 2 - Modulation, Pitch, and Time-Based Effects

23
more detail:
Chorus
A Chorus adds a short delay to your signal. The delayed signal is modulated in and out of tune
and then mixed back with the original signal to create a thicker sound. The RP1000 includes
the following Chorus Effects: CECHoruS (based on the classic Boss
®
CE-2 Chorus), tccho-
ruS (based on the TC Electronic Chorus), CHORUS (DigiTech
®
’s Dual Chorus), glischrs
(DigiTech’s Glistening Chorus) and MultCHRS (DigiTech’s famous Multi Chorus
®
), voo doo
(based on the VooDoo Labs Analog Chorus), and clone (Based on the Electro Harmonix Small
Clone).
Knobs 2-6 have the following functions for the various Chorus types:
Chorus Knob 2
(Pre/Post
Amp)
Knob 3
(Speed)
Knob 4
(Depth)
Knob 5
(Regenera-
tion)
Knob 6
(FX Level)
CECHoruS
Pre/Post Amp Speed Depth -- --
TCCHorus
Pre/Post Amp Speed Width -- Intensity
chorus
Pre/Post Amp Speed Depth Waveform Level
glischrs
Pre/Post Amp Speed Depth -- Level
Multchrs
Pre/Post Amp Speed Depth Waveform Level
voo doo
Pre/Post Amp Speed Intensity -- --
clone
Pre/Post Amp Rate Depth -- --
Flanger
A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds regenera-
tion (or repeats) to the modulating delay. This results in an exaggerated up and down sweep-
ing motion to the effect. The RP1000 includes the following Flanger Effects: fLanger (the
DigiTech
®
Flanger), trigfLnG (the DigiTech Triggered Flanger), fLtrFLng (the DigiTech
Filter Flanger), mx FLngr (based on an MXR
®
Flanger), eh FLngr (based on an Electro-
Harmonix
®
Electric Mistress), and ad FLngr (based on an A/DA Flanger).
Knobs 2-6 have the following functions for the various Flanger types: